Norton

Target pest	To prevent and eliminate termites, ants and insects living in the soil.
Hazardous Substance Registration (FDA)	No. 644/2553
Chemical group	chloronicotinyl
Active ingredient	imidacloprid 10% W/V
Characteristics	It attack the nervous system of insects, through skin contract and stomach poison.
packing	1 liter each
Recommended dosage	Use Norton 1 liter with 200 liters of water. Pre-construction: Sprayed 5 liters per 1 sq.m. Or spray at a rate of 200 liters per area of 40 square meters. Post construction: Drill hole along the wall 20-30 cm. apart and 3 cm.every from wall. Spray 5 liter mixture in every 1 sq.m.
Caution!	-Keep away from heat, children, food and pets. -Care should be taken not to enter the eyes, nose, or skin. - After spraying quickly clean the body immediately before drinking water. Or smoking

* If irritation or severe allergic reaction. Should see a doctor with an attachments of Athena.

Norton is a termiticide using chloronicotinyl to create a chemical barrier under your house. The active ingredient is imidacloprid form up a non-repellent barrier and make every termite which pass through the treated area, bring back the termiticide silently to their nest. The imidacloprid laster with spread to the whole colony and eliminate the termite colony in few day.

Norton has an active ingredient, imidacloprid 10%, in the chloronicotinyl group. Imidacloprid interferes with nervous of insect and insects sluggish, stop eating and eventually die.

Norton sprayed on the ground before concrete floors to prevent insects living underground. Especially termite on the building. Or spray around the building to control population of insect under the ground.

Pre-construction building use 1 bottle of Norton (1 liter), mix 200 liters water every 1sq.m. spray 5 liter of mixture. (No underground pipe system)

Norton will be decomposes after 2 years. To maintain it best performance, it should be re-treat the soil every 2 years.